BenchOhm

Series Resistor Calculator

Resistors in series simply add: Rt = R1 + R2 + …, and the same current flows through each. 1 kΩ + 2.2 kΩ + 4.7 kΩ = 7.9 kΩ; on 12 V that string draws 1.519 mA and the 4.7k drops 7.139 V.

Total, current and drops

R11 kΩ
R22.2 kΩ
R34.7 kΩ

Units: 470, 4.7k, 4k7, 1M, 0R5. Up to 10 resistors.

V

Total resistance

7.9 kΩ

Worst case
7.505 kΩ to 8.295 kΩ
Current
1.519 mA
Total power
18.23 mW
Same parts in parallel
599.8 Ω
ResistorDropSharePowerBuy (2×)
R1 1 kΩ1.519 V12.7%2.307 mW0.125 W
R2 2.2 kΩ3.342 V27.8%5.076 mW0.125 W
R3 4.7 kΩ7.139 V59.5%10.84 mW0.125 W

Missing resistor and standard pairs

Add in series with 4.7 kΩ

300 Ω

Exact value. Nearest E12: 330 Ω → 5.03 kΩ (+0.60%).

Best E12 pair from scratch: 4.7 kΩ + 270 Ω = 4.97 kΩ (-0.60%). Single nearest part: 4.7 kΩ (-6.00%).

Ideal resistors; the worst case assumes every part errs in the same direction. Everything runs in your browser. How we calculate.

Total resistance in a series circuit

Resistors are in series when they sit end to end with nothing branching off between them, so the current has exactly one path. Each resistor opposes that current in turn, and the oppositions stack:

Rt = R1 + R2 + R3 + … + Rn

Two quick checks catch most mistakes. The total must be bigger than the largest resistor in the string. And n identical resistors give n × R, so four 470 Ω parts make 1.88 kΩ. Mind the units before adding: 4.7k + 330 is 5,030 Ω, not 334.7.

Current and voltage drop across each resistor

Because there is one path, one current flows through every part. Find it from the supply and the total with Ohm's law, then get each drop from its own resistance:

I = V ÷ Rt    Vn = I × Rn    Pn = I² × Rn

Worked example, 12 V across 1 kΩ, 2.2 kΩ and 4.7 kΩ: I = 12 ÷ 7,900 = 1.519 mA. The drops are 1.52 V, 3.34 V and 7.14 V, which add back to 12 V. That is Kirchhoff's voltage law: around a closed loop the drops equal the supply. Each resistor takes the same share of the voltage as it has of the resistance, 4.7 ÷ 7.9 = 59.5%, and that is the whole idea behind a voltage divider.

The calculator also lists the power of every part and a rating to buy with a 2× margin. Heat follows resistance: the biggest resistor runs hottest, the reverse of a parallel bank. For a single resistor and any pair of V, I, R or P, use the Ohm's law calculator.

Current through common totals

I = V ÷ Rt for a series string of that total.
Total Rat 5 Vat 9 Vat 12 Vat 24 V
100 Ω50 mA90 mA120 mA240 mA
220 Ω22.73 mA40.91 mA54.55 mA109.1 mA
470 Ω10.64 mA19.15 mA25.53 mA51.06 mA
1 kΩ5 mA9 mA12 mA24 mA
2.2 kΩ2.273 mA4.091 mA5.455 mA10.91 mA
4.7 kΩ1.064 mA1.915 mA2.553 mA5.106 mA
10 kΩ500 µA900 µA1.2 mA2.4 mA

Finding a missing resistor

Homework and repair jobs often give the total and all but one part. Subtract: Rx = Rt − (R1 + R2 + …). If the total is unknown but you can measure the supply and the current, get it first from Rt = V ÷ I. In practice the missing value is rarely a part you can buy, so the second tool rounds it to the nearest standard value and shows what total you end up with. Need 5 kΩ and have 4.7 kΩ? The exact remainder is 300 Ω, and 330 Ω from an E12 kit lands at 5.03 kΩ, 0.6% high.

Two kit resistors in series instead of one you lack

An E12 kit covers 10% steps. Most of the in-between E24 values are an exact sum of two E12 parts, which is often easier than a parallel pair: 10 of the 12 values below come out with zero error in series, while the best parallel pairs from the same kit miss by up to 0.64%. The search tries every pair of E12 values below the target.

Target (E24)Series pair (E12)ErrorParallel pair (E12)Error
1.1 kΩ1 kΩ + 100 Ω0.00%2.2 kΩ ∥ 2.2 kΩ0.00%
1.3 kΩ1.2 kΩ + 100 Ω0.00%4.7 kΩ ∥ 1.8 kΩ+0.12%
1.6 kΩ1.5 kΩ + 100 Ω0.00%3.9 kΩ ∥ 2.7 kΩ-0.28%
2 kΩ1 kΩ + 1 kΩ0.00%22 kΩ ∥ 2.2 kΩ0.00%
2.4 kΩ1.2 kΩ + 1.2 kΩ0.00%22 kΩ ∥ 2.7 kΩ+0.20%
3 kΩ1.5 kΩ + 1.5 kΩ0.00%33 kΩ ∥ 3.3 kΩ0.00%
3.6 kΩ1.8 kΩ + 1.8 kΩ0.00%47 kΩ ∥ 3.9 kΩ+0.03%
4.3 kΩ3.3 kΩ + 1 kΩ0.00%47 kΩ ∥ 4.7 kΩ-0.63%
5.1 kΩ3.3 kΩ + 1.8 kΩ0.00%56 kΩ ∥ 5.6 kΩ-0.18%
6.2 kΩ4.7 kΩ + 1.5 kΩ0.00%68 kΩ ∥ 6.8 kΩ-0.29%
7.5 kΩ6.8 kΩ + 680 Ω-0.27%15 kΩ ∥ 15 kΩ0.00%
9.1 kΩ8.2 kΩ + 820 Ω-0.88%100 kΩ ∥ 10 kΩ-0.10%

Parallel pairs come from our parallel resistor calculator. To read the bands on the parts you already have, use the resistor color code calculator.

Series, parallel and mixed networks

Series raises resistance and keeps current equal; parallel lowers resistance and keeps voltage equal. The calculator shows the same parts combined in parallel next to the series total so you can see how far apart the two are. A mixed network is reduced step by step: collapse each group that is purely parallel into one value, add the series parts, and repeat until one resistor is left.

Where series resistors show up

Questions people ask

How do you calculate resistance in a series circuit?

Add the resistances: Rt = R1 + R2 + R3 + … A 1 kΩ, a 2.2 kΩ and a 4.7 kΩ in a row make 7.9 kΩ. The total is always larger than the largest single resistor.

Is the current the same through resistors in series?

Yes. A series circuit has only one path, so every resistor carries the same current, I = V ÷ Rt. What differs is the voltage across each one, which is proportional to its resistance.

How do you find the voltage across each resistor in series?

Find the current first, I = V ÷ Rt, then multiply by each resistance: V1 = I × R1. With 12 V across 1k + 2.2k + 4.7k the current is 1.52 mA and the 4.7k drops 7.14 V. The drops always add back up to the supply voltage.

How do you find a missing resistor value in a series circuit?

Subtract the known resistors from the total: Rx = Rt − (R1 + R2 + …). If you only know the voltage and current, get the total first from Rt = V ÷ I. The second tool on this page does this and suggests the nearest standard part.

Which resistor gets hottest in a series string?

The largest one. Power is I² × R and the current is the same everywhere, so heat is shared in proportion to resistance. In the example above the 4.7k dissipates almost five times what the 1k does.

Do resistors in series add tolerance?

In the worst case the percentage stays the same: three 5% resistors give a total within ±5%, but the error in ohms is the sum of the three errors. Random errors partly cancel, so a real string is usually closer to nominal than the worst case.