BenchOhm

Parallel Resistor Calculator

For resistors in parallel, 1/Rt = 1/R1 + 1/R2 + … and the result is always below the smallest resistor. 1 kΩ, 2.2 kΩ and 4.7 kΩ in parallel make 599.8 Ω.

Total resistance

R11 kΩ
R22.2 kΩ
R34.7 kΩ

Units: 470, 4.7k, 4k7, 1M, 0R5. Up to 10 resistors.

V

Equivalent resistance

599.8 Ω

Smallest resistor
1 kΩ
Nearest E24 part
620 Ω
Same resistors in series
7.9 kΩ

Hit a target value

Put in parallel with 10 kΩ

30 kΩ

Exact partner. Nearest E12: 33 kΩ → 7.674 kΩ (2.33%).

Best E12 pair from scratch: 15 kΩ ∥ 15 kΩ = 7.5 kΩ (0.00%). Single nearest part: 8.2 kΩ (9.33%).

Ideal resistors, no tolerance applied. Everything runs in your browser. How we calculate.

How to find total resistance in a parallel circuit

Resistors are in parallel when both ends of each one connect to the same two nodes, so they all see the same voltage. Their conductances (1/R, in siemens) add up, and the total resistance is the reciprocal:

1/Rt = 1/R1 + 1/R2 + 1/R3 + … + 1/Rn

For exactly two resistors the same thing reads more easily as product over sum:

Rt = (R1 × R2) ÷ (R1 + R2)

Worked example with three resistors, 1 kΩ, 2.2 kΩ and 4.7 kΩ: 1/1000 + 1/2200 + 1/4700 = 0.001000 + 0.000455 + 0.000213 = 0.001667 S. The reciprocal is about 600 Ω. Check: 600 Ω is under the smallest resistor, 1 kΩ, as it must be.

Shortcuts worth remembering

Current and power in each branch

Enter the supply voltage and the calculator lists the current and power for every resistor. Every branch sees the full voltage, so the branch current is V ÷ R and the power is V² ÷ R. The currents add up to the total, V ÷ Rt. This is the current-divider rule in practice, and it is where parallel resistors bite: the smallest resistor carries the biggest current and needs the biggest wattage. Splitting heat across several resistors in parallel is a standard way to build a power resistor from small parts. Pick each part's rating from its own dissipation, using the 2× margin from the Ohm's law calculator.

Making values you do not have

A kit of E12 resistors has 12 values per decade: 1.0, 1.2, 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 6.8, 8.2. The values in between, which E24 adds, can be made by putting two E12 parts in parallel. This table is computed by trying every pair of E12 values; most land within 1% of the target.

Search: every pair a ≥ b from E12 between 0.1× and 1000× the target; smallest error wins, ties go to the smaller pair.
Target (E24)Best E12 pairResultError
1.1 kΩ2.2 kΩ ∥ 2.2 kΩ1.1 kΩ+0.00%
1.3 kΩ4.7 kΩ ∥ 1.8 kΩ1.302 kΩ+0.12%
1.6 kΩ3.9 kΩ ∥ 2.7 kΩ1.595 kΩ-0.28%
2 kΩ22 kΩ ∥ 2.2 kΩ2 kΩ+0.00%
2.4 kΩ22 kΩ ∥ 2.7 kΩ2.405 kΩ+0.20%
3 kΩ33 kΩ ∥ 3.3 kΩ3 kΩ+0.00%
3.6 kΩ47 kΩ ∥ 3.9 kΩ3.601 kΩ+0.03%
4.3 kΩ47 kΩ ∥ 4.7 kΩ4.273 kΩ-0.63%
5.1 kΩ56 kΩ ∥ 5.6 kΩ5.091 kΩ-0.18%
6.2 kΩ68 kΩ ∥ 6.8 kΩ6.182 kΩ-0.29%
7.5 kΩ15 kΩ ∥ 15 kΩ7.5 kΩ+0.00%
9.1 kΩ100 kΩ ∥ 10 kΩ9.091 kΩ-0.10%

The same search runs live in the Hit a target value tool for any value and for E12, E24 or E96 parts. If you already have one resistor and need to bring it down, give it as resistor you already have: the exact partner comes from R2 = (R1 × Rt) ÷ (R1 − Rt).

Common parallel combinations

PairTotal
100 Ω ∥ 100 Ω50 Ω
220 Ω ∥ 220 Ω110 Ω
330 Ω ∥ 470 Ω193.9 Ω
1 kΩ ∥ 1 kΩ500 Ω
1 kΩ ∥ 2.2 kΩ687.5 Ω
2.2 kΩ ∥ 4.7 kΩ1.499 kΩ
4.7 kΩ ∥ 4.7 kΩ2.35 kΩ
10 kΩ ∥ 10 kΩ5 kΩ
10 kΩ ∥ 22 kΩ6.875 kΩ
10 kΩ ∥ 47 kΩ8.246 kΩ

Series vs parallel

In series, one current flows through every resistor and resistances simply add, so the total is always above the largest one. In parallel, one voltage sits across every resistor and the total is below the smallest. Mixed networks are solved from the inside out: combine each parallel group into one equivalent value, then add the series parts. Our calculator shows the series sum of the same resistors next to the parallel result so the difference is easy to see; the series resistor calculator adds the voltage drop on each part. To read the value printed on each part first, use the resistor color code calculator.

Tolerance in parallel

Two 5% resistors in parallel still give a 5% result at worst: if both sit at +5%, the total is +5% too. Random errors partly cancel, so a pair is usually a little closer to nominal than one part, but do not count on it. For a precision value, use 1% parts or measure and select.

Questions people ask

How do you calculate resistors in parallel?

Add up the reciprocals of every resistance and take the reciprocal of the sum: 1/Rt = 1/R1 + 1/R2 + … For two resistors that simplifies to Rt = (R1 × R2) ÷ (R1 + R2).

Is total resistance in parallel always less than the smallest resistor?

Yes. Every extra path lets more current through, so the combination always measures below the smallest single resistor. If your answer is bigger, a reciprocal was missed.

What is the resistance of two equal resistors in parallel?

Half of one of them. In general n equal resistors in parallel give R ÷ n: four 1 kΩ resistors make 250 Ω.

How is current split between parallel resistors?

Each branch has the full supply voltage across it, so each carries V ÷ R of its own. The smallest resistor takes the biggest share of the current and gets the hottest. Enter a voltage above to see each branch.

What resistor do I put in parallel to lower a resistance?

Use R2 = (R1 × Rt) ÷ (R1 − Rt), where R1 is the resistor you have and Rt is the value you want. To bring 10 kΩ down to 7.5 kΩ you need 30 kΩ in parallel. The second tool on this page does it and suggests the closest standard part.

What is the difference between series and parallel resistors?

In series the same current flows through each resistor and resistances add: 1k + 1k = 2k. In parallel the same voltage sits across each and the total drops: 1k ∥ 1k = 500 Ω. Series raises resistance, parallel lowers it.